NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
no set garp timer leave
Mode • Interface Config
• Global Config
set garp timer leaveall
This command sets how frequently Leave All PDUs are generated. A Leave All PDU indicates
that all registrations will be unregistered. Participants would need to rejoin in order to maintain
registration. The value applies per port and per GARP participation. The time may range from 200
to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds. You can use this command on
all ports (Global Config mode) or a single port (Interface Config mode), and it only has an effect
only when GVRP is enabled.
Default 1000
Format
set garp timer leaveall <200-6000>
Mode • Interface Config
• Global Config
no set garp timer leaveall
This command sets how frequently Leave All PDUs are generated the default and only has an
effect when GVRP is enabled.
Format
no set garp timer leaveall
Mode • Interface Config
• Global Config
show garp
This command displays GARP information.
Format
show garp
Mode • Privileged EXEC
• User EXEC
Switching Commands
v1.0, November 2010
3-60