NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 451

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no passwords min-length
Use this command to set the minimum password length to the default value.
Format
no passwords min-length
Mode Global Config
passwords history
Use this command to set the number of previous passwords that shall be stored for each user
account. When a local user changes his or her password, the user will not be able to reuse any
password stored in password history. This ensures that users don't reuse their passwords often. The
valid range is 0-10.
Default 0
Format
passwords history <0-10>
Mode Global Config
no passwords history
Use this command to set the password history to the default value.
Format
no passwords history
Mode Global Config
passwords aging
Use this command to implement aging on passwords for local users. When a user's password
expires, the user will be prompted to change it before logging in again. The valid range is 1-365.
The default is 0, or no aging.
Default 0
Format
passwords aging <1-365>
Mode Global Config
Management Commands
v1.0, November 2010
7-35