NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 391

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Parameter Definition
Group Multicast group address in the IGMP header.
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
Format
no debug igmpsnooping receive
Mode Privileged EXEC
debug ip acl
Use this command to enable debug of IP Protocol packets matching the ACL criteria.
Default disabled
Format
debug ip acl <acl Number>
Mode Privileged EXEC
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
Format
no debug ip acl <acl Number>
Mode Privileged EXEC
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission. receive traces only
received DVMRP packets and transmit traces only transmitted DVMRP packets. When neither
keyword is used in the command, then all DVMRP packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console
Default disabled
Format
debug ip dvmrp packet [receive|transmit]
Mode Privileged EXEC
Utility Commands
v1.0, November 2010
6-67