NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 341

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
• show port all
• show isdp neighbors
• show logging
• show event log
• show logging buffered
• show trap log
Format
show tech-support
Mode Privileged EXEC
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the show running-config and show running-config all commands.
The terminal length size is either zero or a number in the range of 5 to 48. After the user-
configured number of lines is displayed in one page, the system prompts the user "--More-- or
(q)uit." Press q or Q to quit, or press any key to display the next set of <5-48> lines. The
command terminal length 0 disables pagination and, as a result, the output of the show
running-config command is displayed immediately.
Default 24 lines per page
Format
terminal length <0|5-48>
Mode Privileged EXEC
no terminal length
Use this command to set the terminal length to the default value.
Format
no terminal length
Mode Privileged EXEC
Utility Commands
v1.0, November 2010
6-17