NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 425

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no serial baudrate
This command sets the communication rate of the terminal interface.
Format
no serial baudrate
Mode Line Config
serial timeout
This command specifies the maximum connect time (in minutes) without console activity. A value
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default 5
Format
serial timeout <0-160>
Mode Line Config
no serial timeout
This command sets the maximum connect time (in minutes) without console activity.
Format
no serial timeout
Mode Line Config
login authentication
To specify login authentication method list for remote telnet or console, use the
command in line configuration mode.
authentication
Format
login authentication {default | list-name}
Mode Line Config
no login authentication
To return to the default specified by the
Format
no login authentication {default | list-name}
Mode Line Config
Management Commands
login authentication
v1.0, November 2010
login
command.
7-9