NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 145
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
lacp partner port id
Use this command to configure the LACP partner port id. The valid range for <port-id> is 0 to
65535.
Default
0x80
Format
lacp partner portid <port-id>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner port id
Use this command to set the LACP partner port id to the default.
Format
no lacp partner portid
Mode
Interface Config
lacp partner port priority
Use this command to configure the LACP partner port priority. The valid range for <priority>
is 0 to 255.
Default
0x0
Format
lacp partner port priority <priority>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
Switching Commands
v1.0, November 2010
3-104
Advertisement
Table of Contents
