Show Radius Servers - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

show radius servers

This command displays the summary and details of RADIUS authenticating servers configured for
the RADIUS client.
Format
show radius servers [ { <ipaddr | dnsname> | name [<servername> ] } ]
Mode Privileged EXEC
Field
ipaddr
dnsname
servername
Current
Host Address
Server Name
Port
Type
Current Host Address The IP address of the currently active authenticating server.
Secret Configured
Number of
Retransmits
Message
Authenticator
Time Duration
RADIUS Accounting
Mode
RADIUS Attribute 4
Mode
RADIUS Attribute 4
Value
The following shows example CLI display output for the command.
(Switch) #show radius servers
Cur Host Address
Management Commands
Description
The IP address of the authenticating server.
The DNS name of the authenticating server.
The alias name to identify the server.
The '*' symbol preceeding the server host address specifies that the server is
currently active.
The IP address of the host.
The name of the authenticating server.
The port used for communication with the authenticating server.
Specifies whether this server is a primary or secondary type.
Yes or No Boolean value that indicates whether this server is configured with a
secret.
The configured value of the maximum number of times a request packet is
retransmitted.
A global parameter to indicate whether the Message Authenticator attribute is
enabled or disabled.
The configured timeout value, in seconds, for request retransmissions.
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in RADIUS requests.
A global parameter that specifies the IP address to be used in NAS-IP-Address
attribute used in RADIUS requests.
Server Name
v1.0, November 2010
Port Type
7-67