NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 552

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no user idle-timeout
Use this command to reset the idle timeout to the default value.
Format
no user <1-128> idle-timeout timeout
Mode Captive Portal Configuration mode
user max-bandwidth-down
Use this command to configure the bandwidth at which the client can receive data from the
network. <1-128> is the user ID. The range of bps is <0-536870911> bps. 0 indicates use global
configuration.
Default 0
Format
user
Mode Captive Portal Configuration mode
no user max-bandwidth-down
Use this command to reset the limit to the default.
Format
no user
Mode Captive Portal Configuration mode
user max-bandwidth-up
Use this command to configure the bandwidth at which the client can send data into the Network.
<1-128> is the user ID. The range of bps is <0-536870911> bps. 0 indicates use global
configuration.
Default 0
Format
user
Mode Captive Portal Configuration mode
Captive Portal Commands
<1-128> max-bandwidth-down bps
<1-128> max-bandwidth-down
<1-128> max-bandwidth-up bps
v1.0, November 2010
9-27