Show Clock - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
For each configured server:
Term Definition
Host Address IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port Server Port Number.
Last Attempt Last server attempt time for the specified server.
Time
Last Update Last server attempt status for the server.
Status
Total Unicast Number of requests to the server.
Requests
Failed Unicast Number of failed requests from server.
Requests

show clock

This command is used to display the time information.
Format
show clock [detail]
Mode Privileged EXEC
Term Definition
Time The time provided by the time source.
Time Source The time source type.
If option detail is specified, these terms are displayed
Time Zone The time zone configured.
Summer Time Indicate if the summer time is enabled.
Utility Commands
v1.0, November 2010
6-39