ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
Format
no port-security max-static
Mode
Interface Config
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is
the VLAN ID.
Format
port-security mac-address <mac-address> <vid>
Mode
Interface Config
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
no port-security mac-address <mac-address> <vid>
Mode
Interface Config
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Format
port-security mac-address move
Mode
Interface Config
Switching Commands
v1.0, November 2010
3-159