NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 137
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical
unit/slot/port number of a configured port-channel. To clear the port channels, see
channel" on page 6-27
Format
deleteport <logical unit/slot/port> all
Mode
Global Config
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value
range of <key> is 0 to 65535.
Default
0x8000
Format
lacp admin key <key>
Mode
Interface Config
Note: This command is only applicable to port-channel interfaces.
no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
Format
no lacp admin key
Mode
Interface Config
Switching Commands
.
v1.0, November 2010
"clear port-
3-96
Advertisement
Table of Contents
