NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 189
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
Format
no set igmp mrouter interface
Mode
Interface Config
ip igmpsnooping unknown-multicast
This command enables the filtering of unknown multicast packets to the VLAN. Packets with an
unknown multicast address in the destination field will be dropped. This command is mainly used
when IGMP snooping is enabled, to prevent flooding of unwanted multicast packets to every port.
Format
ip igmpsnooping unknown-multicast
Mode
Global Config
no ip igmpsnooping unknown-multicast
This command disables the filtering of unknown multicast packets. Unknown multicast packets
will be flooded to all ports in the same VLAN.
Format
no ip igmpsnooping unknown-multicast
Mode
Global Config
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Format
show igmpsnooping [<unit/slot/port> | <vlan_id>]
Mode
Privileged EXEC
Switching Commands
v1.0, November 2010
3-148
Advertisement
Table of Contents
