NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 303

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term
Policy Table Size
Current /Max
Policy Instance Table
Size Current /Max
Policy Attribute Table
Size Current /Max
Service Table Size
Current /Max
show policy-map
This command displays all configuration information for the specified policy. The
<policyname> is the name of an existing DiffServ policy.
Format
show policy-map [policyname]
Mode Privileged EXEC
If the Policy Name is specified the following fields are displayed:
Term Definition
Policy Name The name of this policy.
Policy Type The policy type (Only inbound policy definitions are supported for this platform.)
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Term Definition
Assign Queue Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name The name of this class.
Committed Burst The committed burst size, used in simple policing.
Size (KB)
Committed Rate The committed rate, used in simple policing,
(Kbps)
Conform Action The current setting for the action taken on a packet considered to conform to the policing
parameters. This is not displayed if policing is not in use for the class under this policy.
Quality of Service (QoS) Commands
Definition
The current number of entries (rows) and the maximum allowed entries (rows) in
the Policy Table.
Current number of entries (rows)
the Policy Instance Table.
Current number of entries (rows) and the maximum allowed entries (rows) in the
Policy Attribute Table.
The current number of entries (rows) i and the maximum allowed entries (rows) in
the Service Table.
v1.0, November 2010
and the maximum allowed entries (rows)
in
5-29