Serviceability Packet Tracing Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Mode
Global Config
Default
Enabled
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions affecting
their managed switch product.
Caution! The output of "debug" commands can be long and may adversely affect system
performance.
debug arp
Use this command to enable ARP debug protocol messages.
Default
disabled
Format
debug arp
Mode
Privileged EXEC
no debug arp
Use this command to disable ARP debug protocol messages.
Format
no debug arp
Mode
Privileged EXEC
debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace
H323, SCCP, or SIP packets respectively.
Default
disabled
Format
debug auto-voip [H323|SCCP|SIP]
Mode
Privileged EXEC
Utility Commands
v1.0, November 2010
6-62
Advertisement
Table of Contents
