NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 68

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Designated The Identifier of the designated root for this port.
Root
Root Path Cost The path cost to get to the root bridge for this instance. The root path cost is zero if the
bridge is the root bridge for that instance.
Designated Bridge Identifier of the bridge with the Designated Port.
Bridge
Designated Port Port on the Designated Bridge that offers the lowest cost to the LAN.
Identifier
Loop The current loop inconsistent state of this port in this MST instance. When in loop
Inconsistent
inconsistent state, the port has failed to receive BPDUs while configured with loop guard
State
enabled. Loop inconsistent state maintains the port in a "blocking" state until a
subsequent BPDU is received.
Transitions Into The number of times this interface has transitioned into loop inconsistent state.
Loop
Inconsistent
State
Transitions Out The number of times this interface has transitioned out of loop inconsistent state.
of Loop
Inconsistent
State
If you specify 0 (defined as the default CIST ID) as the <mstid>, this command displays the
settings and parameters for a specific switch port within the common and internal spanning tree.
The <unit/slot/port> is the desired switch port. In this case, the following are displayed.
Term Definition
Port Identifier The port identifier for this port within the CST.
Port Priority The priority of the port within the CST.
Port Forwarding The forwarding state of the port within the CST.
State
Port Role The role of the specified interface within the CST.
Auto-Calculate Indicates whether auto calculation for port path cost is enabled or not (disabled).
Port Path Cost
Port Path Cost The configured path cost for the specified interface.
Auto-Calculate Indicates whether auto calculation for external port path cost is enabled.
External Port
Path Cost
Switching Commands
v1.0, November 2010
3-27