NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 337

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
If you enter the interface <unit/slot/port> parameter, in addition to the MAC
Address and Status fields, the following field appears:
Term Definition
VLAN ID The VLAN on which the MAC address was learned.
The following information displays if you enter the count parameter:
Term Definition
Dynamic Number of MAC addresses in the forwarding database that were automatically learned.
Address count
Static Address Number of MAC addresses in the forwarding database that were manually entered by a
(User-defined)
user.
count
Total MAC Number of MAC addresses currently in the forwarding database.
Addresses in
use
Total MAC Number of MAC addresses the forwarding database can handle.
Addresses
available
show process cpu
This command provides the percentage utilization of the CPU by different tasks.
Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU
busy.
Format
show process cpu
Mode Privileged EXEC
The following shows example CLI display output.
(Switch) #show process cpu
Memory Utilization Report
status bytes
Utility Commands
v1.0, November 2010
6-13