NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 492

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
port
Use the port command in TACACS Configuration mode to specify a server port number. The
server <port-number> range is 0 - 65535.
Default 49
Format
port <port-number>
Mode TACACS Config
priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
Default 0
Format
priority <priority>
Mode TACACS Config
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The <timeout> parameter has
a range of 1-30 and is the timeout value in seconds.
Format
timeout <timeout>
Mode TACACS Config
show tacacs
Use the show tacacs command to display the configuration and statistics of a TACACS+
server.
Format
show tacacs [<ip-address|hostname>]
Mode Privileged EXEC
Management Commands
v1.0, November 2010
7-76