NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 40
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
boot auto-copy-sw trap
This command sends SNMP traps related to stack firmware synchronization.
Default
Enabled
Format
boot auto-copy-sw trap
Mode
Privileged EXEC
no boot auto-copy-sw trap
This command disables sending SNMP traps related to stack firmware synchronization.
Format
no boot auto-copy-sw trap
Mode
Privileged EXEC
boot auto-copy-sw allow-downgrade
This command enables downgrading the firmware version on the stack member if the firmware
version on the manager is older than the firmware version on the member.
Default
Enabled
Format
boot auto-copy-sw allow-downgrade
Mode
Privileged EXEC
no boot auto-copy-sw allow-downgrade
This command disables downgrading the image.
Format
no boot auto-copy-sw allow-downgrade
Mode
Privileged EXEC
Stacking Commands
v1.0, November 2010
2-16
Advertisement
Table of Contents
