NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 531

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no configuration
Use this command to delete a CP configuration. The default configuration cannot be deleted.
Format
no configuration <1-10>
Mode Captive Portal Configuration mode
enable (Instance)
Use this command to enable a captive portal configuration.
Default enable
Format
enable
Mode Captive Portal Instance mode
no enable
Use this command to disable a configuration.
Default enable
Format
no enable
Mode Captive Portal Instance mode
name
Use this command to configure the name for a captive portal configuration. The cp-name can be
up to 32 alphanumeric characters in length.
Default Configuration 1 has the name "Default" by default. All other configurations
Format
name <cp-name>
Mode Captive Portal Instance mode
Captive Portal Commands
have no name by default.
v1.0, November 2010
9-6