NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 184
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
•
Flooding of unregistered multicast data packets to all ports in the VLAN.
Default
disabled
Format
set igmp
Mode
• Global Config
• Interface Config
Format
set igmp <vlanid>
Mode
VLAN Config
no set igmp
This command disables IGMP Snooping on the system, an interface or a VLAN.
Format
no set igmp
Mode
• Global Config
• Interface Config
Format
no set igmp <vlanid>
Mode
VLAN Config
set igmp interfacemode
This command enables IGMP Snooping on all interfaces. If an interface has IGMP Snooping
enabled and you enable this interface for routing or enlist it as a member of a port-channel (LAG),
IGMP Snooping functionality is disabled on that interface. IGMP Snooping functionality is re-
enabled if you disable routing or remove port-channel (LAG) membership from an interface that
has IGMP Snooping enabled.
Default
disabled
Format
set igmp interfacemode
Mode
Global Config
Switching Commands
v1.0, November 2010
3-143
Advertisement
Table of Contents
