NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 554

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no user max-output-octets
Use this command to reset the limit to the default.
Default 0
Format
no user <1-128> max-output-octets
Mode Captive Portal Configuration mode
user max-total-octets
Use this command to limit the number of bytes the user is allowed to transmit and receive. The
maximum number of octets is the sum of octets transmitted and received. After this limit has been
reached the user will be disconnected. <1-128> is the user ID. The range of octets is 0-
4294967295. 0 indicates to use the global limit.Use the "no" form of this command to reset the
limit to the default.
Default 0
Format
user <1-128> max-total-octets octets
Mode Captive Portal Configuration mode
no user max-total-octets
Use this command to reset the limit to the default.
Format
no user <1-128> max-total-octets
Mode Captive Portal Configuration mode
show captive-portal user
Use this command to display all configured users or a specific user in the captive portal local user
database.
Captive Portal Commands
v1.0, November 2010
9-29