Show Radius - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

show radius

This command displays the values configured for the global parameters of the RADIUS client.
Format
show radius
Mode Privileged EXEC
Term
Number of Configured
Authentication Servers
Number of Configured
Accounting Servers
Number of Named
Authentication Server
Groups
Number of Named
Accounting Server
Groups
Number of Retransmits
Time Duration
RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the servers
RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has been
RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-
The following shows example CLI display output for the command.
(Switch)#show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60
Management Commands
Definition
The number of RADIUS Authentication servers that have been configured.
The number of RADIUS Accounting servers that have been configured.
The number of configured named RADIUS server groups.
The number of configured named RADIUS server groups.
The configured value of the maximum number of times a request packet is
retransmitted.
The configured timeout value, in seconds, for request re-transmissions.
is enabled or not.
enabled to use in RADIUS requests.
Address attribute to be used in RADIUS requests.
v1.0, November 2010
7-66