Switch Database Management (Sdm) Templates - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
copy (pre-login banner)
The copy command includes the option to upload or download the CLI Banner to or from the
switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or Zmodem.
Note: <ip6address> is also a valid parameter for routing packages that support IPv6.
Default none
Format
copy <Code Sample Variable><tftp://<ipaddr>/<filepath>/
<filename>><Code Sample Variable> nvram:clibanner
copy nvram:clibanner <Code Sample Variable><tftp://<ipaddr>/
<filepath>/<filename>><Code Sample Variable>
Mode Privileged EXEC
set prompt
This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Format
set prompt <prompt_string>
Mode Privileged EXEC

Switch Database Management (SDM) Templates

You can use SDM templates to configure system resources in the switch and optimize support for
specific features depending on how the switch is used in the network. You can select a template to
provide the maximum system usage for a specific function. For example, you could use a routing
template to optimize resources for IPv4 routing if the network environment does not use IPv6
routing.
Note:
• If you configure an SDM template, you must reload the switch for the configuration to take
effect.
Management Commands
v1.0, November 2010
7-80