NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 541

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
CP ID The captive portal ID.
CP Name The captive portal name.
Interface The interface associated with the CP ID
Interface The interface description
Description
Operational Status The operational status is enabled or disabled.
Disable Reason The reason if the operational status is disabled.
Block Status It shows this captive portal instance block all traffic or not.
If the interface is specified. The following term will be displayed.
Term Definition
Authenticated The number of authenticated users associated with the CP ID.
users
Example
(Switch)#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description
--------- ---------------------
Unit:1Slot:0Port:1
(Switch)#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigab
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
Captive Portal Commands
Operational
Status
----------------
Disabled
v1.0, November 2010
Block
Status
----------1/0/1
Blocked
9-16