NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 140
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
lacp actor admin state longtimeout
Use this command to set LACP actor admin state to longtimeout.
Format
lacp actor admin state longtimeout
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin state longtimeout
Use this command to set the LACP actor admin state to short timeout.
Format
no lacp actor admin state longtimeout
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
lacp actor admin state passive
Use this command to set the LACP actor admin state to passive.
Format
lacp actor admin state passive
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
Switching Commands
v1.0, November 2010
3-99
Advertisement
Table of Contents
