NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 120

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
The
show dot1x detail <unit/slot/port>
based dot1x fields if the port-control mode for that specific port is MAC-based. For each client
authenticated on the port, the
the following MAC-based dot1x parameters if the port-control mode for that specific port is MAC-
based.
Term Definition
Supplicant The MAC-address of the supplicant.
MAC-Address
Authenticator Current state of the authenticator PAE state machine. Possible values are Initialize,
PAE State
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized.
Backend Current state of the backend authentication state machine. Possible values are Request,
Authentication
Response, Success, Fail, Timeout, Idle, and Initialize.
State
VLAN-Assigned The VLAN assigned to the client by the radius server.
Logical Port The logical port number associated with the client.
If you use the optional parameter statistics <unit/slot/port>, the following dot1x
statistics for the specified port appear.
Term Definition
Port The interface whose statistics are displayed.
EAPOL Frames The number of valid EAPOL frames of any type that have been received by this
Received
authenticator.
EAPOL Frames The number of EAPOL frames of any type that have been transmitted by this
Transmitted
authenticator.
EAPOL Start The number of EAPOL start frames that have been received by this authenticator.
Frames
Received
EAPOL Logoff The number of EAPOL logoff frames that have been received by this authenticator.
Frames
Received
Last EAPOL The protocol version number carried in the most recently received EAPOL frame.
Frame Version
Last EAPOL The source MAC address carried in the most recently received EAPOL frame.
Frame Source
Switching Commands
show dot1x detail <unit/slot/port>
v1.0, November 2010
command will display the following MAC-
command will display
3-79