NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 455

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no passwords strength minimum special-letters
Use this command to reset the minimum number of special letters to the default value.
Format
no passwords strength minimum special-letters
Mode Global Config
passwords strength maximum consecutive-characters
Use this command to enforce a maximum number of consecutive characters that a password
should contain. An example of consecutive characters is abcd. The valid range is 0-16. If a
password has consecutive characters more than the configured limit, it fails to configure. The
default is 0. A maximum of 0 means no restriction on that set of characters.
Format
passwords strength maximum consecutive-characters
Mode Global Config
Default 0
no passwords strength maximum consecutive-characters
Use this command to reset the maximum number of consecutive characters to the default value.
Format
no passwords strength maximum consecutive-characters
Mode Global Config
passwords strength maximum repeated-characters
Use this command to enforce a maximum number of repeated characters that a password should
contain. An example of repeated characters is aaaa. The valid range is 0-16. If a password has a
repetition of characters more than the configured limit, it fails to configure. The default is 0. A
maximum of 0 means no restriction on that set of characters.
Format
passwords strength maximum repeated-characters
Mode Global Config
Default 0
Management Commands
v1.0, November 2010
7-39