NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 214

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
lldp med confignotification
Use this command to configure all the ports to send the topology change notification.
Default enabled
Format
lldp med confignotification
Mode Interface Config
no ldp med confignotification
Use this command to disable notifications.
Format
no lldp med confignotification
Mode Interface Config
lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set
will be transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs).
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode Interface Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Switching Commands
v1.0, November 2010
3-173