NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 459

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
where:
Format
aaa authentication login {default | list-name} method1 [method2...]
Mode Global Config
Default Uses the listed authentication methods that follow this argument as the default
list of methods when a user logs in.
list-name Character string used to name the list of authentication methods activated when
a user logs in. Up to 12 characters.
method1 [method2...] At least one from the following table:
Keyword
enable
line
local
none
radius
tacacs
The local user database is checked. This has the same effect as the following
Note:
command:
no aaa authentication login
This command is used to remove authentication at login.
Format
no aaa authentication login {default | list-name}
Mode Global Config
Management Commands
Description
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS servers for authentication.
aaa authentication login local
v1.0, November 2010
7-43