NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 259

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no ip mtu
This command resets the ip mtu to the default value.
Format
no ip mtu <mtu>
Mode Interface Config
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be ethernet or snap.
Default ethernet
Format
encapsulation {ethernet | snap}
Mode Interface Config
Note: Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.
clear ip route all
This command removes all the route entries learned over the network.
Format
clear ip route all
Mode Privileged EXEC
Protocol Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number The total number of routes.
of Routes
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Routing Commands
v1.0, November 2010
4-13