NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 235
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Note: Not all messages below are available in all 7000series managed switches.
Term
Definition
First Fragment
May be enabled or disabled. The factory default is disabled.
Mode
Min TCP Hdr
The factory default is 20.
Size <0-255>
ICMP Mode
May be enabled or disabled. The factory default is disabled.
Max ICMPv4 Pkt
The range is 0-1023. The factory default is 512.
Size
Max ICMPv6 Pkt
The range is 0-16384. The factory default is 512.
Size
ICMP Fragment
May be enabled or disabled. The factory default is disabled.
Mode
L4 Port Mode
May be enabled or disabled. The factory default is disabled.
TCP Port Mode
May be enabled or disabled. The factory default is disabled.
UDP Port Mode May be enabled or disabled. The factory default is disabled.
SIPDIP Mode
May be enabled or disabled. The factory default is disabled.
SMACDMAC
May be enabled or disabled. The factory default is disabled.
Mode
TCP Flag Mode
May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&
May be enabled or disabled. The factory default is disabled.
PSH Mode
TCP Flag &
May be enabled or disabled. The factory default is disabled.
Sequence Mode
TCP SYN Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN & FIN
May be enabled or disabled. The factory default is disabled.
Mode
TCP Fragment
May be enabled or disabled. The factory default is disabled.
Mode
TCP Offset
May be enabled or disabled. The factory default is disabled.
Mode
Switching Commands
v1.0, November 2010
3-194
Advertisement
Table of Contents
