NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 80

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no vlan protocol group
This command removes a protocol group.
Format
no vlan protocol group <1-128>
Mode Global Config
vlan protocol group name
This command assigns a name to a protocol-based VLAN groups. The groupname variable can be
a character string of 0 to 16 characters.
Format
vlan protocol
Mode Global Config
no vlan protocol group name
This command removes the name from a protocol-based VLAN groups.
Format
no vlan protocol
Mode Global Config
vlan protocol group add protocol
This command adds the protocol to the protocol-based VLAN identified by groupid. Agroup may
have more than one protocol associated with it. Each interface and protocolcombination can only
be associated with one group. If adding a protocol to a group causes any conflicts with interfaces
currently associated with the group, this command fails and the protocol is not added to the group.
The possible values for protocol-list includes the keywords ip, arp, and ipx and hexadecimal or
decimal values ranging from 0x0600 (1536) to 0xFFFF (65535). The protocol list can accept up to
16 protocols separated by a comma.
Default none
Format
vlan protocol group add protocol <groupid> ethertype {<protocol-
list>|arp|ip|ipx}
Mode Global Config
Switching Commands
group name
<1-128> <groupname>
group name
<1-128>
v1.0, November 2010
3-39