NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 536

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
max-output-octets
Use this command to configure the maximum number of octets the user is allowed to receive.
After this limit has been reached the user will be disconnected. The number of octets is in bytes. 0
indicates limit not enforced Use the "no".
Default 0
Format
max-output-octets <0-4294967295>
Mode Captive Portal Instance mode
no max-output-octets
Use this command to reset the limit to the default.
Format
no max-output-octets
Mode Captive Portal Instance mode
max-total-octets
Use this command to configure the maximum number of octets the user is allowed to transfer, i.e.,
the sum of octets transmitted and received. After this limit has been reached
disconnected. The number of t
"no" form of this command to reset the limit to the
Default 0
Format
max-total-octets <0-4294967295>
Mode Captive Portal Instance mode
no max-total-octets
Use this command to reset the limit to the default.
Default 0
Captive Portal Commands
otal octets is in bytes. 0 indicates limit not enforced.
v1.0, November 2010
the user will be
default.
Use the
9-11