NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 239
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
isdp timer
This command sets the period of time between sending new ISDP packets. The range is given in
seconds.
Default
30 seconds
Format
isdp timer <5-254>
Mode
Global Config
isdp advertise-v2
This command enables the sending of ISDP version 2 packets from the device.
Default
Enabled
Format
isdp advertise-v2
Mode
Global Config
no isdp advertise-v2
This command disables the sending of ISDP version 2 packets from the device.
Format
no isdp advertise-v2
Mode
Global Config
isdp enable
This command enables ISDP on the interface.
Default
Enabled
Format
isdp enable
Mode
Interface Config
Switching Commands
v1.0, November 2010
3-198
Advertisement
Table of Contents
