Hold-Time; Holddown - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

holddown

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

hold-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1812
®
OS for EX Series Ethernet Switches, Release 10.3
holddown seconds;
[edit logical-systems logical-system-name protocols ripng],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ripng],
[edit protocols ripng],
[edit routing-instances routing-instance-name protocols ripng]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for routing instances introduced in Junos OS Release 9.0.
Configure the time period the expired route is retained in the routing table before being
removed.
—Estimated time to wait before making updates to the routing table.
seconds
Default: 180 seconds
Range: 10 through 180 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring RIPng Timers
hold-time seconds;
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure the time in seconds after which a backup router with the highest priority
preempts the master router.
Hold-time period.
seconds—
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1698
Copyright © 2010, Juniper Networks, Inc.