Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1663

Step-by-Step
Procedure
Results
Copyright © 2010, Juniper Networks, Inc.
To configure the three VLANs on the Distribution Switch, to configure the trunk interfaces,
and to enable GVRP on the trunk interface of the Distribution Switch:
Configure the finance VLAN:
1.
[edit]
user@Distribution-Switch# set vlans finance vlan–id 100
Configure the lab VLAN:
2.
[edit]
user@Distribution-Switch# set vlans lab vlan–id 200
Configure the sales VLAN:
3.
[edit]
user@Distribution-Switch# set vlans sales vlan–id 300
Configure the trunk interface to Access Switch A:
4.
[edit]
user@Distribution-Switch# set interfaces xe-0/1/1 unit 0 familyethernet-switching
port-mode trunk
Configure the trunk interface to Access Switch B:
5.
[edit]
user@Distribution-Switch# set interfaces xe-0/1/0 unit 0 family ethernet-switching
port-mode trunk
Enable GVRP on the trunk interface for
6.
[edit]
user@Distribution-Switch# set protocols gvrp interface xe-0/1/1.0
Enable GVRP on the trunk interface for
7.
[edit]
user@Distribution-Switch# set protocols gvrp interface xe-0/1/0.0
Display the results of the configuration:
[edit]
user@Distribution Switch-D #show
interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching;
}
}
Chapter 64: Examples: Bridging and VLAN Configuration
xe-0/1/1 :
xe-0/1/0 :
1559