Danfoss iC7 Motion Series Application Manual page 105

Application Guide | iC7 Series Motion
P 2.1.14 Actual Relative Output Current Limit
Description: Shows the actual output current limit relative to the nominal motor current.
Default Value: NA
Unit: %
P 2.1.15 Heat Sink Temperature
Description: Shows the temperature of the power unit heat sink.
Default Value: NA
Unit: °C
P 2.1.16 Main Fan Speed
Description: Shows the speed of the main cooling fan.
Default Value: NA
Unit: rpm
P 2.1.17 Internal Fan Speed
Description: Shows the speed of the internal cooling fan.
Default Value: NA
Unit: rpm
P 2.1.19 Heat Sink Temperature Output
Description: Select the output indicating if the heat sink temperature is within range.
Default Value:
Unit: -
P 2.1.20 Drive DC-link Voltage Output
Description: Select the output indicating if the DC-link voltage is within range.
Default Value:
Unit: -
Power Unit Settings (Menu Index 2.2)
6.3.3
General Settings (Menu Index 2.2.1)
6.3.3.1
P 2.2.1.1 Unit Voltage Class
© 2023.11
Parameter Type: Range (0 — 300)
Data Type: REAL
Parameter Type: Range (-50 — 200)
Data Type: REAL
Parameter Type: Range (0 — 32767)
Data Type: INT
Parameter Type: Range (0 — 32767)
Data Type: INT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Number: 2700
Access Type: Read Only
Parameter Number: 2950
Access Type: Read Only
Parameter Number: 2931
Access Type: Read Only
Parameter Number: 2926
Access Type: Read Only
Parameter Number: 2312
Access Type: Read/Write
Parameter Number: 2311
Access Type: Read/Write
AB318753549016en-000301 / 136R0284 |
103