Danfoss iC7 Motion Series Application Manual page 261

Application Guide | iC7 Series Motion
Default Value: 0
Unit: PositionUnit
Homing (Menu Index 5.17)
6.6.18
Homing Status (Menu Index 5.17.1)
6.6.18.1
P 5.17.1.1 Home Status
Description: Shows the status of homing.
Default Value: NA
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
3
4
P 5.17.1.2 Home Active Output
Description: Select a digital output to signal that homing is active.
Default Value:
Unit: -
P 5.17.1.3 Home Done Output
Description: Select a digital output to signal that homing is done.
Default Value:
Unit: -
P 5.17.1.4 Home Error Output
Description: Select a digital output to signal that homing is incomplete due to an error.
Default Value:
Unit: -
© 2023.11
Parameter Type: Range (-2147483648 —
2147483647)
Data Type: DINT
Parameter Type: Selection
Data Type: UINT
Selection Name
Idle
Active
Done
Error
Aborted
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Number: 355
Access Type: Read/Write
Parameter Number: 5103
Access Type: Read Only
Selection Description
FeatureStatusDoneText.
FeatureStatusErrorText.
FeatureStatusAbortedText.
Parameter Number: 5105
Access Type: Read/Write
Parameter Number: 5106
Access Type: Read/Write
Parameter Number: 5107
Access Type: Read/Write
AB318753549016en-000301 / 136R0284 |
259