Danfoss iC7 Motion Series Application Manual page 268

Application Guide | iC7 Series Motion
P 5.18.1.1.5 Touch Probe 1 Recorded Position
Description: Shows the recorded actual position at the latest touch probe 1 event.
Default Value: NA
Unit: -
P 5.18.1.1.6 Touch Probe 1 Recorded Position Output
Description: Select an analog output to represent the recorded actual position of the latest touch probe 1 event. The signal is scaled
between Min. Position Limit and Max. Position Limit.
Default Value:
Unit: -
P 5.18.1.1.7 Touch Probe 1 Counter
Description: Shows the number of detected touch probe 1 events since the counter was reset.
Default Value: NA
Unit: -
P 5.18.1.1.8 Touch Probe 1 Counter Output
Description: Select an analog output to represent the number of detected touch probe 1 events. The signal is scaled between 0 and
65535.
Default Value:
Unit: -
Configuration (Menu Index 5.18.1.2)
6.6.19.1.2
P 5.18.1.2.1 Touch Probe 1 Input
Description: Select a digital input for connection of the touch probe 1 sensor.
Default Value:
Unit: -
P 5.18.1.2.2 Touch Probe 1 Enable Input
Description: Select a digital input for activating touch probe 1 monitoring.
Default Value:
Unit: -
266
| © 2023.11
Parameter Type: Range (-16777216 —
16777216)
Data Type: DINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (0 — 65535)
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Number: 881
Access Type: Read Only
Parameter Number: 802
Access Type: Read/Write
Parameter Number: 882
Access Type: Read Only
Parameter Number: 803
Access Type: Read/Write
Parameter Number: 870
Access Type: Read/Write
Parameter Number: 871
Access Type: Read/Write
AB318753549016en-000301 / 136R0284