Danfoss iC7 Motion Series Application Manual page 297

Application Guide | iC7 Series Motion
P 5.8.1.11 Control Panel Speed Reference
Description: Shows the value of the speed reference given from the control panel.
Default Value: NA
Unit: Hz
P 5.8.1.12 Absolute Output Frequency Output
Description: Select an output terminal for the output frequency scaled between 0 Hz and positive speed limits in Hz.
Default Value:
Unit: -
P 5.8.1.13 Absolute Speed Reference Output
Description: Select an output terminal for the absolute speed reference, scaled between 0 and positive speed limit.
Default Value:
Unit: -
P 5.8.1.14 Output Frequency Output
Description: Select an output terminal for the output frequency scaled between minimum speed limit and positive speed limits in Hz.
Default Value:
Unit: -
P 5.8.1.16 Load Drooping Speed
Description: Shows the load drooping speed.
Default Value: NA
Unit: Hz
Torque Control Status (Menu Index 5.9.1)
6.7.2.10
P 5.9.1.1 Motor Torque
Description: Shows the actual motor torque.
Default Value: NA
Unit: Nm
P 5.9.1.2 Relative Motor Torque
Description: Shows the motor torque in % of the nominal motor torque.
© 2023.11
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Range (-10000000 — 10000000)
Data Type: REAL
Parameter Number: 6153
Access Type: Read/Write
Parameter Number: 2300
Access Type: Read/Write
Parameter Number: 2304
Access Type: Read/Write
Parameter Number: 2308
Access Type: Read/Write
Parameter Number: 674
Access Type: Read Only
Parameter Number: 9009
Access Type: Read Only
AB318753549016en-000301 / 136R0284 |
295