Danfoss iC7 Motion Series Application Manual page 76

Application Guide | iC7 Series Motion
Table 22: Datalogger Settings Fields
Field name
Sample time (ms)
Window time (s)
Storage
Trigger position (s)
74
| © 2023.11
Field description
Enter a sample time in ms. The actual sample time depends
on the switching frequency. Fast sample rate settings result
in data changing slowly in the resulting log.
Defines the size of the capture window. Enter the window
time in seconds.
High sample rates and large capture times that result in
large capture files may be rejected when the configuration is
applied.
Select the location to which datalogger files are stored.
Available selections are:
• RAM: Settings are stored to the RAM of the drive.
• Flash: Settings are stored to the flash of the drive.
• SD card: Data is stored on the (optional) microSD card.
The microSD cards supported are: SD, SDHC, or SDXC which
must be formatted for the FAT32 file system. SDHC is the
recommended type, as they are delivered preformatted to
FAT32.
Adjust the slider to position the trigger. Setting the trigger
position to 0 indicates the datalogger recording starts at
the time of the trigger. Setting a negative value indicates
that the datalogger recording starts after the trigger has oc-
curred. Setting a positive value indicates that the datalogger
recording starts before the trigger has occurred.
AB318753549016en-000301 / 136R0284