Danfoss iC7 Motion Series Application Manual page 180

Application Guide | iC7 Series Motion
I/O Control (Menu Index 5.5.5)
6.6.7.6
Commands (Menu Index 5.5.5.1)
6.6.7.6.1
P 5.5.5.1.1 Start Input
Description: Select the digital input for the start command.
Default Value:
Unit: -
P 5.5.5.1.2 Start Backward Input
Description: Select the digital input for the start command in the backward direction.
Default Value:
Unit: -
P 5.5.5.1.3 Stop Inverse Input
Description: Select the digital input for the inverted stop command.
Default Value:
Unit: -
P 5.5.5.1.4 Coast Inverse Input
Description: Select the digital input for the inverted coast command.
Default Value:
Unit: -
P 5.5.5.1.5 Reversing Input
Description: Select the digital input for inverting the reference signal. The reverse command does not provide a start signal.
Default Value:
Unit: -
P 5.5.5.1.6 Reset Input
Description: Select the digital input for resetting faults.
Default Value:
Unit: -
P 5.5.5.1.8 Start Signal Mode
178
| © 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Number: 200
Access Type: Read/Write
Parameter Number: 210
Access Type: Read/Write
Parameter Number: 201
Access Type: Read/Write
Parameter Number: 202
Access Type: Read/Write
Parameter Number: 204
Access Type: Read/Write
Parameter Number: 203
Access Type: Read/Write
AB318753549016en-000301 / 136R0284