Danfoss iC7 Motion Series Application Manual page 367

Application Guide | iC7 Series Motion
Table 48: Summary Table (continued)
Group Numb Display Name
Numb er
er (Deci
(Hex) mal)
0x54F 4629 STO Fault Ch. A
E
0x54F 4630 STO Fault Ch. B
E
0x54F 4149 DC-link Short Circuit
F
0x54F 4150 DC Capacitor Short Circuit
F
0x54F 4151 DC-link Short Circuit 2
F
0x553 4790 Control Data Error
0
0x553 4791 Invalid PUD
0
0x610 4134 SystemTimeAdjust
0
0x610 4135 RtcHwError
0
0x610 4304 License Missing
0
0x610 4349 Authenticity Error
0
0x610 4351 System Fault
0
0x610 4357 Firmware Crash
0
0x610 4567 Restore Status
0
0x610 4568 AutomaticReset
0
0x610 4816 PLC Task Overrun
0
© 2023.11
Description
The Safe Torque-Off (STO) is activated due
to a discrepancy fault: Channel A is not acti-
vated, while channel B is activated.
The Safe Torque-Off (STO) is activated due
to a discrepancy fault: Channel B is not acti-
vated, while channel A is activated.
An internal short circuit is detected in the DC
link. Service is required.
A short circuit in a DC-link capacitor is de-
tected. Service is required.
A short circuit in the DC-link capacitor is de-
tected. Service is required.
A data error is detected in the control data
database EEPROM.
A data error has been detected in the power
unit database EEPROM.
SystemTime has been adjusted
RTC HW error detected
A required license is missing.
Files authenticity verification error occurred.
A system fault has been detected. See addi-
tional information for details.
A firmware crash occurred and detailed infor-
mation is provided.
Provides information about the restore oper-
ation of a setting.
All event conditions have cleared and trig-
gered events have been automatically reset.
The high CPU load is inhibiting normal opera-
tion of the application (PLC task overrun).
Type of Event Inverter and
Brake Chopper
Action
I F P Invert
W F er
X C
X C
X C
X C
X X C
X
X C
X
X
X
X RC
X C
X C
X
X
X
AB318753549016en-000301 / 136R0284 |
Brake
C
C
C
C
C
C
C
365