Danfoss iC7 Motion Series Application Manual page 59

Application Guide | iC7 Series Motion
Control Panel Elements
3.2.2
The control panel provides an interface for configuring and controlling the converter easily. The section describes the elements for all
control panel options.
BUS
WARN
REA DY
FAULT
Figure 26: Control Panel Elements
The following table describes the control panel elements:
Table 18: Control Panel Elements Description
Legend Name of Element
1 Fieldbus Indicators
2 Display
© 2023.11
1
12
11
3
10
9
Description
The LEDs indicate the status of the communication interface X1 and X2.
• [ST]
- Green blinking LED indicates that the communication interfaces are in normal operating
state.
- Red blinking LED indicates that an error has occurred and communication is not possible.
• [X1]
- Green blinking LED indicates data exchange on communication interface X1.
- Red blinking LED indicates an error during data exchange on communication interface
X1.
• [X2]
- Green blinking LED indicates data exchange on communication interface X2.
- Red blinking LED indicates an error during data exchange on communication interface
X2.
Enables access to content and settings. The display provides detailed information about the sta-
tus of the converter.
BUS
Conveyor belt 14
1420
rpm
Speed
WARN READY FAULT
OK
REM
LOC
OFF RUN
8 7
1
2
3
4
5
6
AB318753549016en-000301 / 136R0284 |
57