Danfoss iC7 Motion Series Application Manual page 325

Application Guide | iC7 Series Motion
Selection Number
9007
9044
9041
9040
9048
9049
9050
9047
729
737
741
736
350
881
882
894
895
896
© 2023.11
Selection Name
Feedback Speed
DC-link Voltage
Grid Frequency
Line-To-Line Voltage (RMS)
L1-L2 Line Voltage (RMS)
L2-L3 Line Voltage (RMS)
L3-L1 Line Voltage (RMS)
Grid Voltage Imbalance
Actual Position
Actual Position Error
Position Demanded
Reference Position
Master Position
Touch Probe 1 Recorded Position
Touch Probe 1 Counter
Touch Probe 2 Recorded Position
Touch Probe 2 Counter
Touch Probe Distance
Selection Description
Shows the feedback speed.
Shows the actual DC-link voltage.
Shows the actual grid frequency.
Shows the average line-to-line voltage
(RMS).
Shows the L1-L2 line voltage (RMS).
Shows the L2-L3 line voltage (RMS).
Shows the L3-L1 line voltage (RMS).
Shows the grid voltage imbalance in %. A
value greater than 3% may indicate grid
problems.
Shows the actual position in position
units.
Shows the position error (difference
between actual position and demanded
position).
Shows the demanded position (output of
the profile generator).
Shows the reference/target position in
position units.
Shows the actual position of the master in
position units.
Shows the recorded actual position at the
latest touch probe 1 event.
Shows the number of detected touch
probe 1 events since the counter was
reset.
Shows the recorded actual position at the
latest touch probe 2 event.
Shows the number of detected touch
probe 2 events since the counter was
reset.
Shows the distance between the events
at source B and source A. The value is
updated at the event of source B.
AB318753549016en-000301 / 136R0284 |
323