Danfoss iC7 Motion Series Application Manual page 204

Application Guide | iC7 Series Motion
Default Value:
Unit: -
P 5.8.1.14 Output Frequency Output
Description: Select an output terminal for the output frequency scaled between minimum speed limit and positive speed limits in Hz.
Default Value:
Unit: -
P 5.8.1.16 Load Drooping Speed
Description: Shows the load drooping speed.
Default Value: NA
Unit: Hz
Additional Information on Speed Control Status
6.6.10.3
P 5.8.1.12 Absolute Output Frequency Output
Note:
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the terminals.
For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
P 5.8.1.13 Absolute Speed Reference Output
Note:
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the terminals.
For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
P 5.8.1.13 Absolute Speed Reference Output
Note:
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the terminals.
For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
Speed Controller (Menu Index 5.8.2)
6.6.10.4
Basic Settings (Menu Index 5.8.2.1)
6.6.10.4.1
P 5.8.2.1.1 Speed Controller Type
Description: Select the speed controller type.
Default Value: 1 [PI-Controller]
Unit: -
The following are the selections for the parameter.
202
| © 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Selection
Data Type: UINT
Parameter Number: 2304
Access Type: Read/Write
Parameter Number: 2308
Access Type: Read/Write
Parameter Number: 674
Access Type: Read Only
Parameter Number: 5005
Access Type: Read/Conditional Write
AB318753549016en-000301 / 136R0284