Danfoss iC7 Motion Series Application Manual page 101

Application Guide | iC7 Series Motion
P 1.1.12 Grid Active Power
Description: Shows the active power at the point of grid connection.
Default Value: NA
Unit: kW
Grid Settings (Menu Index 1.2)
6.2.3
P 1.2.1 Grid Type
Description: Select the grid type of the supply system. The selection affects the setting of "1.2.2 RFI filter" and "2.2.1.7 HF DC-link Filter
Mode" if set to "As grid type".
Default Value: 0 [TN]
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
3
4
P 1.2.2 RFI Filter Mode
Description: Select the Radio Frequency Interference (RFI) filter mode.
Default Value: 2 [Filter matches grid type
selection]
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
© 2023.11
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Selection
Data Type: UINT
Selection Name
TN
TT
IT
HRG
Grounded Delta
Parameter Type: Selection
Data Type: UINT
Selection Name
Filter inactive
Filter active
Filter matches grid type selection
Parameter Number: 9064
Access Type: Read Only
Parameter Number: 2942
Access Type: Read/Conditional Write
Selection Description
Drive connected to a TN grid.
Drive connected to a TT grid.
Drive connected to a IT grid.
Drive connected to a High Resistance Grid
(HRG).
Drive is connected to a grounded delta
grid.
Parameter Number: 2943
Access Type: Read/Conditional Write
Selection Description
The filter is inactive.
The filter is active.
The filter is set according to the selected
grid type.
AB318753549016en-000301 / 136R0284 |
99