Danfoss iC7 Motion Series Application Manual page 140

Application Guide | iC7 Series Motion
Default Value: 320
Unit: V
P 4.3.2.6 Voltage Point 5
Description: Set the U/f curve voltage point 5.
Default Value: 400
Unit: V
P 4.3.2.7 Frequency Point 0
Description: Set the U/f curve frequency point 0.
Default Value: 0
Unit: Hz
P 4.3.2.8 Frequency Point 1
Description: Set the U/f curve frequency point 1.
Default Value: 10
Unit: Hz
P 4.3.2.9 Frequency Point 2
Description: Set the U/f curve frequency point 2.
Default Value: 20
Unit: Hz
P 4.3.2.10 Frequency Point 3
Description: Set the U/f curve frequency point 3.
Default Value: 30
Unit: Hz
P 4.3.2.11 Frequency Point 4
Description: Set the U/f curve frequency point 4.
Default Value: 40
Unit: Hz
138
| © 2023.11
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Type: Range (0 — 2000)
Data Type: REAL
Parameter Number: 2604
Access Type: Read/Write
Parameter Number: 2605
Access Type: Read/Write
Parameter Number: 2610
Access Type: Read/Write
Parameter Number: 2611
Access Type: Read/Write
Parameter Number: 2612
Access Type: Read/Write
Parameter Number: 2613
Access Type: Read/Write
Parameter Number: 2614
Access Type: Read/Write
AB318753549016en-000301 / 136R0284