Danfoss iC7 Motion Series Application Manual page 158

Application Guide | iC7 Series Motion
Default Value:
Unit: -
Additional Information for External Event
6.6.4.3
Events can be issued via an external signal with the parameters of the External Event parameter group. The event can be delayed with
parameters 5.2.2.9 External Event 1 Delay and 5.2.2.10 External Event 2 Delay.
Measured Temp. Protection (Menu Index 5.2.3)
6.6.4.4
Measured Temp. Protection Status (Menu Index 5.2.3.1)
6.6.4.4.1
P 5.2.3.1.1 Protection 1 Temp.
Description: Shows the temperature measured for the temperature protection.
Default Value: NA
Unit: °C
P 5.2.3.1.2 Protection 2 Temp.
Description: Shows the temperature measured for the temperature protection.
Default Value: NA
Unit: °C
P 5.2.3.1.3 Protection 3 Temp.
Description: Shows the temperature measured for the temperature protection.
Default Value: NA
Unit: °C
P 5.2.3.1.4 Protection 4 Temp.
Description: Shows the temperature measured for the temperature protection.
Default Value: NA
Unit: °C
P 5.2.3.1.5 Protection 5 Temp.
Description: Shows the temperature measured for the temperature protection.
Default Value: NA
Unit: °C
P 5.2.3.1.6 Protection 6 Temp.
156
| © 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (-300 — 300)
Data Type: REAL
Parameter Type: Range (-300 — 300)
Data Type: REAL
Parameter Type: Range (-300 — 300)
Data Type: REAL
Parameter Type: Range (-300 — 300)
Data Type: REAL
Parameter Type: Range (-300 — 300)
Data Type: REAL
Parameter Number: 5184
Access Type: Read/Write
Parameter Number: 5200
Access Type: Read Only
Parameter Number: 5201
Access Type: Read Only
Parameter Number: 5202
Access Type: Read Only
Parameter Number: 5203
Access Type: Read Only
Parameter Number: 5204
Access Type: Read Only
AB318753549016en-000301 / 136R0284