Danfoss iC7 Motion Series Application Manual page 283

Application Guide | iC7 Series Motion
P 5.33.2 Motor Fan Ctrl. Output
Description: Select an output to control the motor fan.
Default Value:
Unit: -
P 5.33.3 Cabinet Cooling Fan Ctrl. Output
Description: Select an output to control the cabinet cooling fan.
Default Value:
Unit: -
Maintenance & Service (Menu Index 6)
6.7
Maintenance & Service Overview
6.7.1
This parameter group contains parameters exclusively related to status, events, and backup and restore.
Status (Menu Index 6.1)
6.7.2
Grid Status (Menu Index 1.1)
6.7.2.1
P 1.1.1 Grid Frequency
Description: Shows the actual grid frequency.
Default Value: NA
Unit: Hz
P 1.1.2 Line-To-Line Voltage (RMS)
Description: Shows the average line-to-line voltage (RMS).
Default Value: NA
Unit: V
P 1.1.3 L1-L2 Line Voltage (RMS)
Description: Shows the L1-L2 line voltage (RMS).
Default Value: NA
Unit: V
P 1.1.4 L2-L3 Line Voltage (RMS)
Description: Shows the L2-L3 line voltage (RMS).
© 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Number: 221
Access Type: Read/Write
Parameter Number: 222
Access Type: Read/Write
Parameter Number: 9041
Access Type: Read Only
Parameter Number: 9040
Access Type: Read Only
Parameter Number: 9048
Access Type: Read Only
AB318753549016en-000301 / 136R0284 |
281